How To Remove Tripod Head From Camera
Download Article
Download Commodity
- Remove the Old Caput |
- Install the Replacement
A tripod is an first-class tool for professional and apprentice photographers alike. Eventually, however, you may demand to supercede the tripod head, either considering the old one is worn out or you're upgrading to a better type. Some people are in the dark about the process, but it's actually very like shooting fish in a barrel. In merely a few minutes, you can have off your old tripod head and install a brand new one.
-
1
Tighten the ball locking and center column knobs. You won't be able to unscrew the tripod head if any parts are loose. Start by turning the ball locking knob on the caput clockwise to lock the caput in place. Then turn the center column knob, underneath the caput, clockwise as well until it stops. Double check to make sure the tripod head isn't moving.[one]
- If your tripod or head have whatever more than moving parts, lock them as well. Any loose parts might arrive harder to remove the caput.
-
2
Agree the tripod past its center cavalcade with one manus. Utilise your non-dominant manus. Grab the tripod center column and concur it firmly.[ii]
- Some tripods don't have a center column. If yours doesn't, then grab it by ane of the legs and hold it tightly.
Advertizement
-
3
Turn the tripod head counterclockwise to loosen it. With your other hand, take hold of the tripod head. Turn it counterclockwise to unscrew it. You lot may need to apply some pressure to get it started, since most people don't supervene upon the heads very often.[3]
- If the tripod head doesn't seem to be loosening, and then some of the locking knobs might non be tight enough. Try double checking those and making certain they're all locked in place.
-
4
Pull the old caput off when it unscrews. After simply a few turns, the tripod head should popular off of the main trunk. Lift it off and put it aside.[four]
- Concord on to the head equally yous're unscrewing it. If information technology comes loose unexpectedly, y'all could drib it and break it.
Advertizing
-
i
Gather the new caput if y'all take to. Some new tripod heads might come disassembled. In this instance, follow the instructions provided to assemble the head correctly earlier yous install information technology.[5]
- Commonly, the camera mount isn't installed on new heads. Simply loosen the knob next to the camera platform and slide the mount into position. And so tighten the knob to lock it in place.
-
2
Lock your tripod at a comfy height. Y'all don't want your tripod falling while you're installing the new head, and then make certain it's locked. Prepare it to the acme you want it at, then plough the centre cavalcade knob clockwise to lock it in place.[6]
-
iii
Tighten the pan knob on the new caput. Just similar with removing the old caput, all the parts on the new caput demand to be locked or information technology won't spiral on properly. Plow the pan knob clockwise until it stops to lock the head in place.[7]
- If there are whatsoever other adjustment knobs on the new head, tighten them besides.
-
iv
Marshal the mounting spiral on the tripod with the hole on the new caput. Almost tripods have a mounting screw coming up from the eye column that the head attaches to. Hold the new head straight up and line the hole on the bottom upwardly with this mounting spiral.[8]
- Make sure y'all proceed the new caput pointed directly upwards so information technology doesn't spiral on crooked.
- Less normally, some tripod heads have a spiral coming out that goes into a slot on the tripod. In this instance, you would insert the screw and tighten the tripod knob to lock the caput in place.[9]
-
five
Turn the caput clockwise until it'south tight. Press the head onto the mounting screw and turn information technology to the right. Continue turning until you can't tighten it anymore to lock information technology in identify.[10]
- Check under the head to make sure there's no space between the head and tripod mount. The 2 parts should fit snugly together. If there'due south whatsoever infinite, unscrew the head and reattach information technology.
-
6
Test the new head by moving it around. Confirm that the new head is attached with a quick test. Loosen the pan knob and move the head around. The head should not unscrew or loosen while you lot movement information technology effectually. Bank check to make sure it stays snug.[11]
- If you have any problems, unscrew the head and try again. Make sure it stays completely upright as you're screwing information technology into position. If it's crooked, then it won't attach properly.
Advertisement
Ask a Question
200 characters left
Include your e-mail accost to become a message when this question is answered.
Submit
Advertisement
-
Always confirm the tripod caput removal and installation procedure in your user manual.
Cheers for submitting a tip for review!
Advertisement
-
If there are any screws or bolts on the tripod caput, don't remove them. The head could fall apart without all the pieces attached.[12]
Advertisement
About This Commodity
Thanks to all authors for creating a folio that has been read 11,365 times.
Did this article help you lot?
Source: https://www.wikihow.com/Replace-a-Tripod-Head
0 Response to "How To Remove Tripod Head From Camera"
Post a Comment